WATCO® Teak oil is specifically formulated for dense woods such as teak, rosewood or mahogany. WATCO® teak oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish. It takes less than an hour to treat your wood with WATCO® teak oil, simply brush or wipe-on and wipe-off. WATCO® teak oil is the choice of fine woodworkers and novices alike. Please read product labels for additional directions and precautions before using.
| Applicable Materials | : | Wood |
| Application Method | : | Brush, Rag |
| Boiling Point | : | -18 to 316 deg C |
| Compositions | : | Naphtha, Petroleum, Hydrotreated Light, Rosin Adduct Ester, Stoddard Solvent, Solvent Naphtha, Light Aromatic, Mineral Spirits, Methanol, 3-Iodo-2-Propynyl Butyl Carbamate, Bis(1, 2, 2, 6, 6-Pentamethyl-4-Piperidinyl) Sebacate, Methyl Ethyl Ketoxime |
| Container Type | : | Can |
| Coverage Area | : | 560 to 575 sq-ft/gal |
| Density | : | 0.862 Relative |
| Drying Time | : | 8 hr |
| Flammability Rating | : | 2 |
| Flash Point | : | 49 deg C |
| Form | : | Liquid |
| Net Content | : | 1 qt |
| Odor/Scent | : | Solvent-Like |
| Specific Gravity | : | 0.85 |
| Temperature Rating | : | <49 deg C |
| VOC Content | : | 450 g/L |
| Vehicle Type | : | Oil-Phenolic Rosin Ester |
| Viscosity | : | 25 cPs |
SDS