Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits.
| Body Material |
: |
Melamine |
| Diameter |
: |
0.81 in |
| Element Type |
: |
Single |
| Length |
: |
3 in |
| Rejection/Non-Rejection |
: |
Non-Rejection |
| Voltage Rating |
: |
250 VAC, 125 VDC |
| Fuse Type |
: |
Cartridge |
| Current Rating |
: |
35 A |
| Interrupt Rating |
: |
50 kA |
- Protect lighting, heating and other circuits not subject to temporary surges and where available short-circuit currents are relatively low
- NON one-time fuses do not have any appreciable degree of time delay and thus should not be specified in circuits where large transients or motor overloads occur
- Basic protection 250 V NON class K5 and H general-purpose, non-current-limiting, one-time fuses
-
Catalog
https://assets.unilogcorp.com/187/ITEM/DOC/Bussmann_100014639_Catalog.pdf
-
Specification Sheet
https://assets.unilogcorp.com/187/ITEM/DOC/Bussmann_100014639_Specification_Sheet.pdf
